Has anyone installed a Recess Tray in a 2003 Super Pro? Want to make sure I do not mess with the structural integrity of the platform.
Has anyone installed a Recess Tray in a 2003 Super Pro? Want to make sure I do not mess with the structural integrity of the platform.
I installed a Panther MarineTech Trolling Motor Foot Control Tray in my 2000 210 Super Pro DC.
2000 Pro Craft Super Pro 210 DC
2000 Mercury 250 Pro XB 0G980903
I have one in my 2005 200SP
Can you post a picture?
01307E40-A8C3-4D71-87B8-CC9DFDB80129.jpeg
Not the best picture but this is the aluminum Comfortol.
Mercury 3.0l 225EFI
2001, 0T264057
250XB Fuel ECU
300PM ING ECU
Lightened Flywheel
63cc heads
Boyesen 2stage reeds
Cowl mod
Michael Dilday
Suffolk, Va.
2021 Tracker 195 TXW 150 Merc 4S, Minn Kota Edge TM, Humminbird Fish Finders
I have one on my 200 210 so. Nothing hurt with the install.
Almost forgot, there is fiberglassed in cardbaord half tube under the floor that has a wires run through for the passenger side rod locker light. Just saw through to cut the recess and plan to splice the wires back together. I’d use the blue heat shrink butt splice connectors. You can find them at any auto part store and Walmart.
Mercury 3.0l 225EFI
2001, 0T264057
250XB Fuel ECU
300PM ING ECU
Lightened Flywheel
63cc heads
Boyesen 2stage reeds
Cowl mod