Question for Bullet owners running Humminbird. So I have a 2020 21XRS, 10" Bobs Hydraulic Jackplate and I currently have Transducer Shield Saver Bracket that the transducer is mounted to the Jackplate. What is every one using for their setup? I know in other boats I have owned Skeeter and Champion and am able to graph, side image at faster speeds and still get a pretty good clear picture, from 4 to 5mph, unfortunately at these speeds in the bullet, it becomes distorted and not recognizable and i know this is due to how the water is coming off the hull over the transducer. So what is every ones set up. I feel that I it needs to be lowered 3 to 5 inches to improve the image at those faster idle speeds. Its all about covering water effectively and before I start down this road I wanted to reach out to the community to see about reducing the learning curve significantly. Thanks in advance.