Hi All
I need to replace the Actuator on my brake system. I have a Nitro Z7 single axel trailer with surge disc brakes.
I had the entire drive train replaced this summer. Axel, hubs, brakes, calipers....all are new.
When they went to bleed the brakes they found that the actuator is bad.
I am thinking of going to electric over Hydraulic instead of replacing the actuator.
Just wondering if any of you have converted to this and if it is something that I could install or needs to be done by a shop?
I don't have a lot experience with Surge Brakes.
I have a 2018 Tundra which is equipped with a brake controller.
last is what size would be right for my boat/trailer? My z7 is probably on the heavier side with a 200hp, jackplate, Powerpoles, and dual console.
Thanks in advance for any input you might be able to give!