anyone make an A rig like this
anyone make an A rig like this
What does it look like?
Murray State Alum
2007 Champion 210 with all the toys
I Make them very similar to that. But I don’t sell them
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Mike would you be willing to PM me the material and tools i would need to make them
https://www.crawdadsfishingtackle.com/
https://www.facebook.com/crawdadsfishingtackle/
https://www.ebay.com/str/crawdadsfishingtackle
This guy custom makes my wire to whatever length and diameter I want. I have him make me Camo SS... I have him bend/twist the eyelets on the ends and I bend the middle into an "R" bend... Then I put two together and wrap 20 gauge copper wire around under the r bend about 10 times. Then I solder the wire. Then bend open the wires to my needs. I add a large split ring in front and snap swivels on the bait ends.
So if you want 9in arms, Have him make you 18in wires with closed ends. You bend the middle... If you want a long tag wire, I have him make me some 20-22in as well... The bend the 22 in wire at 9in and this leaves you a longer one behind. I hope you understand.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
You can put a tube over the front if you want on my home made. I dont want any extra lead on the front, Nor do I want resin holding it together... That is my preference. I like to be able to boat flip multiple 4-5lb fish if need be.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Thanks Mike for the help
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html