Seems to be a hot topic around the internet, here’s a video I posted for replacing vault hubs. Hopefully it can help someone out.
Seems to be a hot topic around the internet, here’s a video I posted for replacing vault hubs. Hopefully it can help someone out.
Pretty sure I watched that before I replaced mine. Thank you.
Thanks for posting.
So theres really nothing magical about these so called (un-serviceable) hubs other than the hybrid grease. I will say they have took the best of some old designs and mechanics tricks to put together a better mouse trap.
I will question the (one time use) of front covers.. Was told the same thing with there oil filled hubs. Over a 12 year period I re-installed the same set 3 times just because I'm thrifty.. I did put red rtv silicone on them.
2019 Ford F-150 Platinum (3.5EcoBoost/10spd)
**Listed FOR SALE**2014 Ranger Z119C w/ Evinrude ETEC 225HO Running Croxton’s Razor 4XL 25P
Helix 12 Mega G2N’s with Ultrex
Think like a fish, no matter how weird it gets
Good Job!! Thanks for posting.
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
Should of beat cap on with that PCC tool not a piece of wood , that cap will have the center black part stick out and it can’t if you beat it with flat piece of wood ??
I could be wrong but I think he had the PVC and then the wood, which is 1000 times easier than trying to hit the PVC in even by tapping around the edges, in my experience.Originally Posted by bass2dy
Like the PVC reducer I see him using in the video
Reply With Quote
