I recently purchased a Yamaha wolverine with trailer. The trailer has a plywood floor. Can/should I treat the floor or seal it?
Any recommendations or ideas? Bed Liner maybe?
Thanks,
AK
I recently purchased a Yamaha wolverine with trailer. The trailer has a plywood floor. Can/should I treat the floor or seal it?
Any recommendations or ideas? Bed Liner maybe?
Thanks,
AK
Depends on where you store it and what kind of plywood. Just about any coating will make it slicker.
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
If it's pressure treated plywood, you should cover it to reduce the wet/dry cycles. Any other grade should at least have a water repellant applied. If you paint (or any film finish), consider an anti-skid additive.
You could use a horse stall mat. There about 1/2”-3/4” of a thick rubber that comes in different sizes. In the US we buy them at Tractor Supply or Farm & Fleet stores.
2018 AlumaCraft Competitor 185cs, 2018 Yamaha F150XB w/2019 Yamaha T9.9 kicker w/Trollsmarter
Heritage Custom Trailer w/Torsion axle / Vault Hubs & 4 step Trick Step
Terrova 80# 24v I-Pilot, GARMIN 126sv
Towed by: 2018 Chevy Colorado V6 Crew Cab 4x4 Long bed or 2016 Winnebago 38Q
Thanks men