Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Mar 2019
    Location
    Novi, Michigan
    Posts
    34

    2019 Optimax Pro XS 150 2 stroke fuel filter(s)

    I am a new owner of the Pro XS.
    I replace the water/fuel separator filter, but are there any other fuel filters to change?
    If so, where are they located? I cannot find any?


    Thanks in advance!

  2. Member
    Join Date
    Dec 2013
    Location
    Spring Hope,NC
    Posts
    7,254
    #2
    No,only the one in the vst.

  3. Member
    Join Date
    May 2011
    Location
    Spangle, WA
    Posts
    6,212
    #3
    Your engine is a 2.5L and covered in the next forum down, please include engine serial number (required when posting) - Mercury - 2.0/ 2.4/ 2.5 Liter High Performance

    For the 2.5L Optimax, the fuel filter and fuel water separator is the single spin on filter on the VST.
    _______

    Phil
    '09 Hewescraft ProV
    '09 150 Optimax


  4. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    95,178
    #4
    If you would, please take a moment to review the Announcements at the top of the Forum, and be sure to provide the Required Info (serial number) when posting. Thanks!

    As suggested above, there should be only ONE (1) filter- the spin-on canister filter at the VST (18458T4).

    Moving thread to correct forum.


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor