I’m looking to replace the bearings and seals on my tracker trailer. Is there anyway to find out what size bearings or if there’s a bearing kit available? Boat is a 2014 tracker v175 with single axle.
I’m looking to replace the bearings and seals on my tracker trailer. Is there anyway to find out what size bearings or if there’s a bearing kit available? Boat is a 2014 tracker v175 with single axle.
It should be stamped on the current seals and bearings/races
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
5 lug wheel should be L68149 with L68110 race, and L44649 with L44610 race
VIN number should be all you need
Simple, take the old bearings, races and seals to Oreilly auto. Don't let them sell you Chinese bearings and races, insist on Timken.
2020 Ranger 521L Tour, 300 Mercury, 112 Minn Kota Ultrex
3 12" Helix Units, Mega Si, Mega Di, Mega 360, Garmin 8412 W LiveScope mounted on Rite Hite Turret.
I did a little research from the info provided by you guys. I show L68149, L44649 and L68111, L44610. Mines a little off compared to DABS.
If your axle is round or was made by Reliable, it will take the L68111 race.
Hmm...axles are actually square
Enter your trailer serial number once the attached link is opened. This will give you a complete breakdown of everything on your trailer from the build sheet.
https://tracnet.trackermarine.com/COPM/NewSerial01.shtm
I think my trailer has round axles also
Oreilly doesn't carry Timken, they carry bca bearings and national seals which are both quality parts. Make sure you get the "A" series bearings as that will be the bearing race combo. Then you just need the seal. They have, or should have a trailer bearing "cheat sheet" that will help.