Thread: Prop to pad

Results 1 to 2 of 2
  1. #1
    Member mxrcr4's Avatar
    Join Date
    Jul 2006
    Location
    Springville, AL
    Posts
    923

    Prop to pad

    I still have not seen anyone post prop to pad numbers on a very well set up cx20. I’ve not fooled with mine but I’m running stock 24 fury 4 and wherever caymas set the jack plate and just getting 70mph out of it. It’s better than the 25 fury 3 it came with. I want to try and dial it in this off season and get the prop to pad settled and get a prop to stick with. I’m thinking I’ll end up with a 23 fury 3 which I had on my 2019 trx 20 with great results. But thinking about trying a 25 or 25.5 Bravo 1 fs. Thoughts?

  2. Member
    Join Date
    May 2017
    Location
    Montgomery, TX
    Posts
    988
    #2
    I spoke to the factory a while back and the measurement they use is on the manual jack itself. This resulted in my prop to pad being 3.375". The Z lock is a major pain to adjust, so I never played with it much. I just had a Bob's installed, so now I can really dial things in. I have a SHO, so give the factory a call and they will give you the measurements for the Merc.