Dual Graph Bow mount

[Bill2e]

Considering adding a second graph to the bow. What mounts are you guys using. Most likely going with a bass boat technology pedestal mount. Should I get the 4 or 6 inch pedestal?

[Bill2e]

12 inch graphs

[mike464]

The BBT mount works great, pretty sure I have the 4 inch base,

[Knuckle]

I got a 9 & 12 on a bbt 4” base. Wouldn’t want it any higher.

[Bill2e]

Thanks! I'll go with the 4

[PrecisionSonar]

bass cat towerrr.jpgbcat tower.jpg

Shoot me a call 270-703-6133

We can get you fixed up.

[fisherman1122]

I got a 9 & 12 on a bbt 4” base. Wouldn’t want it any higher.

How does your cover fit with with the units mounted on this mount?

[Knuckle]

How does your cover fit with with the units mounted on this mount?

It doesn’t. My cover is a 32’x24’ garage. I didn’t order a cover with the boat because I wasn’t sure of all the electronic options I would be adding. Still not done. Technology changes quickly, boat covers don’t (after they’re bought).

[BCCougarFTD]

I used a hybrid set up for dual 12". Used BBT base with a 4" riser, then used 3/4 tubing as a spacer. Then heavy modified it to allow the cables to be routed thru base plate. Then I installed the precision Sonar low profile mounts. Both lower than the tolling motor prop. The factory cover still fits with the units removed from the mount.