** SALE** BOTH ARE $64.99, PLUS GET ANOTHER 10% OFF USING DISCOUNT CODE bbc99

The Lowrance Bracket will fit STRUCTURE SCAN 3D, TOTAL SCAN, AND LSS2. Made in America out of 3/16" powder coated aluminum. Mounting Flange is 2.5" tall and 2" wide. It has 6, 5/16" mounting holes for the supplied 1/4" stainless bolts for various mounting options. 45 degree angled section between mounting flange and main transducer mounting surface causes bracket to stick out 1" from jackplate and causes transducer mounting surface to be 1" below mounting flange.Bracket can be mounted on the outside, of the starboard side of jackplate. Also can be mounted to the inside of the port side of jackplate, (recommended for Atlas hydraulic plates).
All you need is a 2" flat mounting surface on your jackplate for this bracket to work.
Again, this bracket works with ACTIVE IMAGING 3 IN 1 AND 2 IN 1, STRUCTURE SCAN 3D, TOTAL SCAN and LSS2 TRANSDUCERS.


The rigid Humminbird mounting bracket will fit the following 7 different MEGA transducers
XM 9 HW MSI T, XM 9 HW MDI T, XM 9 20 MSI T, XM 14 HW MDI T, XM 14 HW MSI T, XM 14 20 MSI T, XM 14 74 MSI T. It is made out of 3/16" aluminum. Mounting Flange is 2.5" tall and 1.5" wide. It has 4, 5/16" mounting holes for the supplied 1/4" stainless bolts for various mounting options. 45 degree angled section between mounting flange and main transducer mounting surface causes bracket to stick out 1" from jackplate and causes transducer mounting surface to be 1" below mounting flange.
Bracket can be mounted on the outside, of the starboard side of jackplate. Also can be mounted to the inside of the port side of jackplate, (recommended for Atlas hydraulic plates).
All you need is a 2" flat mounting surface to mount this bracket
Use code bbc99 for 10% off. http://premiersonar.com


Attached Thumbnails