Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    Sep 2008
    Location
    Windsor, Colorado
    Posts
    27

    Unhappy New Update to Vessel View Link ?

    There's a version 20.1-64.1.18 now available. Hopefully it has the fix for the Troll Control "Helm Must Be Active" problem.

    Alas, I won't be able to tell until I get the update installed and hit the lake. I downloaded the file, copied it to a micro SD card, popped it into the HDS12 Live, browsed over the file, clicked on it, and the HDS proceeded to copy and install the update.

    It took 30 minutes for the HDS to transfer the 15 megabyte file via NEMA 2000 over to the vessel view link. That appeared to be successful. Then it proceeded with installing the update and at about 30% it said "FAILED" and that perhaps I was trying to install an older version than was already installed....... Sigh

    Oh, well, I'll crawl under the helm tomorrow with another SD card and try the direct method.

    Update: Yep. Have to use the direct micro SD card method. This is unfortunate since you get zero feedback on what the VVL is doing. You simply have to wait........ and wait some more......until finally, communication with the engine is finally restored. Thanks for checking out that the troll control works now for us wallyandre
    Last edited by ABQGeo; 10-22-2020 at 03:07 PM. Reason: Update:

  2. #2
    Yes, same by me. Only possible to update in the SD-slot in the VVL.
    Hope the SW solved the issue with troll Control :-)

  3. Member wallyandre's Avatar
    Join Date
    Aug 2007
    Location
    Montreal, Canada & Port Kent NY
    Posts
    1,034
    #3
    Quote Originally Posted by wittenborn View Post
    Yes, same by me. Only possible to update in the SD-slot in the VVL.
    Hope the SW solved the issue with troll Control :-)
    Yes it does

  4. Scraps
    Join Date
    Apr 2007
    Location
    Havertown, PA
    Posts
    9,686
    #4
    Quote Originally Posted by wittenborn View Post
    Yes, same by me. Only possible to update in the SD-slot in the VVL.
    Hope the SW solved the issue with troll Control :-)
    Vaguely remember this the last update. Actually have to dig out the link module and plug into that which differs from an HDS update. For me that means taking the console apart.
    2017 Phoenix 819
    2016 200ProXS, s/n 2B359849, Mod 1200P73BD

  5. Member wallyandre's Avatar
    Join Date
    Aug 2007
    Location
    Montreal, Canada & Port Kent NY
    Posts
    1,034
    #5
    Quote Originally Posted by krindgen View Post
    Vaguely remember this the last update. Actually have to dig out the link module and plug into that which differs from an HDS update. For me that means taking the console apart.
    I had to give 3-4 try before he accept the update

  6. Member bloodman's Avatar
    Join Date
    Oct 2008
    Location
    Belvidere, Il
    Posts
    6,010
    #6
    Mine updated through my Live without an issue.

  7. Banned
    Join Date
    Oct 2017
    Location
    Newman, CA
    Posts
    5,165
    #7
    I'll have to give this a try through the mfd

    ••worked remotely through the mfd. took about 30 minutes••
    Last edited by bshort; 10-23-2020 at 01:20 PM.

  8. Member
    Join Date
    Feb 2018
    Location
    Minnesota
    Posts
    543
    #8
    I've been anticipating this update all season long, now that the boat is in storage, I won't be able to test it out until next spring. They will probably release a new update that breaks some other feature by then.
    2011 Tracker PT 175 TF
    2011 Merc 60 ELPT 4S

  9. Banned
    Join Date
    Oct 2017
    Location
    Newman, CA
    Posts
    5,165
    #9
    Quote Originally Posted by R2Tracker View Post
    I've been anticipating this update all season long, now that the boat is in storage, I won't be able to test it out until next spring. They will probably release a new update that breaks some other feature by then.
    Think I’ll skip future updates for awhile.