Results 1 to 3 of 3
  1. 10-20-2020, 06:43 AM #1
    Seymourbass
    Seymourbass is offline
    Member
    Join Date
    Jun 2004
    Location
    Danville, VT 05828
    Posts
    30

    2002 200EFI #OT761171 The 24" braided oil hose ( part# 32-892830053) from motor mount

    2002 200EFI #OT761171

    The 24" braided oil hose ( part# 32-892830053) from motor mounted oil tank to oil pump was chaffed, leaking and needed to be replaced. It runs from the motor mounted oil tank UNDERNEATH the side and front of the power head to the oil pump. A new power head was installed 2 years ago and the hose was not routed thru the plastic conduit correctly and has rubbed through. I replaced it

    My question: Do I just have to do the "Bleeding air from engine mounted oil tank" procedure or is there something else I need to do before starting the motor?.

    Any input would be greatly appreciated.
    Thanks Dave Lane
    Last edited by Seymourbass; 10-22-2020 at 05:25 PM.
    Reply With Quote Reply With Quote
  2. EuropeanAM
    EuropeanAM is offline
    Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    95,217
    #2 10-28-2020, 02:49 PM
    Really should have an Oil Pump Prime sequence run to make sure no air remains.


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
    Reply With Quote Reply With Quote
  3. Seymourbass
    Seymourbass is offline
    Member
    Join Date
    Jun 2004
    Location
    Danville, VT 05828
    Posts
    30
    #3 10-30-2020, 06:52 AM
    Will do. Thank you for your response.
    Dave Lane
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »