Anyone replace the seat post plastic shim in the floor? Mine are cracking and chipping a lot. It is a round sleeve about 4 inches long. Pulled mine out to inspect and it is very brittle.
Anyone replace the seat post plastic shim in the floor? Mine are cracking and chipping a lot. It is a round sleeve about 4 inches long. Pulled mine out to inspect and it is very brittle.
I did and after they cracked again I went with the adapters to go to a 3/4" pin post. I'm much happier with them.
Tom
Where did you get those adapters?
How did you remove the sleeves?
I just grabbed them with my fingers and slid them out
Any idea on sizes? I see a kit that think might work
https://www.amazon.com/Springfield-M...JEQ7CB1J1FD8SQ
Any one replace the shim in the deck for a seat post?
I have. Easy. Mine was plastic and I cut it in two places with a sawzall and collapsed it in on itself and pulled it out with channel lock pliers. Cleaned up the baseplate hole with a acetone and glued and drove the new one in.
2020 VEXUS 1880 Victor Red
Merc 115 HP Pro XS
Minn Kota Ultrex 80 I-Link MDI
Helix 10 MEGA+ MSI
Helix 9 x 2 MEGA+ MDI
Live Image FFS
2021 Aluminum Trailer
10' Talons w/sandwich brackets
Where did you get the new one?
Would like to know where and what. Mine are cracking.