Page 1 of 2 12 LastLast
Results 1 to 20 of 28
  1. #1
    Member
    Join Date
    Mar 2013
    Location
    Silsbee, Tx
    Posts
    292

    920 Elite Setup/Speed

    What numbers are people seeing with 920 Elites? What prop? I am not seeing the same speeds I did with my ProXP.

  2. Member
    Join Date
    May 2020
    Location
    Madison WI/Long Island NY
    Posts
    20
    #2
    What prop and speed are you getting? I have currently have a 920 elite on order

  3. Member
    Join Date
    Mar 2013
    Location
    Silsbee, Tx
    Posts
    292
    #3
    24P fury. Turning 5900+ RPM and struggling to hit 70. My proxp with same prop was mid to high 70s. Have talked to several other people with same issue. Was told to try 23P

  4. Member
    Join Date
    Dec 2007
    Location
    Soddy Daisy, TN
    Posts
    2,513
    #4
    Sounds like engine is a little high. Does it lift good?

  5. Member
    Join Date
    Mar 2013
    Location
    Silsbee, Tx
    Posts
    292
    #5
    Quote Originally Posted by Landar View Post
    Sounds like engine is a little high. Does it lift good?
    Yes sir it does. Would that matter with a hydraulic jack plate though?

  6. Member
    Join Date
    Sep 2014
    Location
    Oklahoma City,OK
    Posts
    343
    #6
    I am having the same problem. Lifts good but I can not get the rpms. I am getting 5650 running 69-70 that’s it.

  7. Member
    Join Date
    Mar 2013
    Location
    Silsbee, Tx
    Posts
    292
    #7
    Quote Originally Posted by jimbotaylor View Post
    I am having the same problem. Lifts good but I can not get the rpms. I am getting 5650 running 69-70 that’s it.
    What prop are you running?

  8. Member
    Join Date
    Sep 2014
    Location
    Oklahoma City,OK
    Posts
    343
    #8
    24 fury 3 blade

  9. Member
    Join Date
    Mar 2013
    Location
    Silsbee, Tx
    Posts
    292
    #9
    Quote Originally Posted by jimbotaylor View Post
    24 fury 3 blade
    Me too. Hoping to find someone running a 23P

  10. Member
    Join Date
    Aug 2012
    Location
    Hemphill,Texas
    Posts
    197
    #10
    Have you had someone check to make sure you're getting 100% throttle?

  11. Member
    Join Date
    Mar 2013
    Location
    Silsbee, Tx
    Posts
    292
    #11
    Quote Originally Posted by jchips View Post
    Have you had someone check to make sure you're getting 100% throttle?
    No sir, have not. Honestly, didn't cross my mind to check that! Figured since my RPMs were up I was?

  12. Member
    Join Date
    Mar 2018
    Location
    Godley,TX
    Posts
    174
    #12
    Quote Originally Posted by amac View Post
    No sir, have not. Honestly, didn't cross my mind to check that! Figured since my RPMs were up I was?
    Are you getting your rpm from Smartcraft or analog? When I added Smartcraft to my boat I found out my tach was reading 150–200 rpms high. If it’s really turning 5900+ and your struggling to hit 70 then your getting a lot of slip at the prop. Im getting 75+ at 5900 with a 24 Fury (stock). Maybe your prop is a little off.
    2019 Phoenix 919 Pro XP - Mercury 225 Pro XS V8

  13. Member
    Join Date
    Mar 2013
    Location
    Silsbee, Tx
    Posts
    292
    #13
    Quote Originally Posted by FD209 View Post
    Are you getting your rpm from Smartcraft or analog? When I added Smartcraft to my boat I found out my tach was reading 150–200 rpms high. If it’s really turning 5900+ and your struggling to hit 70 then your getting a lot of slip at the prop. Im getting 75+ at 5900 with a 24 Fury (stock). Maybe your prop is a little off.
    Smartcraft

  14. Member Coach's Avatar
    Join Date
    Mar 2006
    Location
    Ardmore
    Posts
    137
    #14
    Something is definitely not right you should be mid 70's easy. I'm at 77 with a fury 24 three blade and 74 with a fury 24 four blade.

  15. Member
    Join Date
    Mar 2013
    Location
    Silsbee, Tx
    Posts
    292
    #15
    Quote Originally Posted by Coach View Post
    Something is definitely not right you should be mid 70's easy. I'm at 77 with a fury 24 three blade and 74 with a fury 24 four blade.
    Yes sir for sure

  16. Member
    Join Date
    Sep 2014
    Location
    Oklahoma City,OK
    Posts
    343
    #16
    Mine is 5650 with smart craft as well but hitting 69-70.

  17. Member
    Join Date
    Jul 2013
    Location
    Indianapolis Indiana
    Posts
    631
    #17
    Not the same boat but for what its worth I have a 20PHX with Merc250 4S. I had a 24 Fury 3 and could get to low 70's at about 5900 RPM's. Boat felt sluggish and hole shot was moderate. Switched to a 23 and the boat came alive with hole shot and mid range. About same top end at 71-72 with 6200 RPM's. Most are running the 24 that seemed to be the stock prop from Mercury for Phoenix's. Now I hear some boats with the 4S are coming standard with a 23. I also run a 25 Bravo 1 XS as a backup. Good solid prop that really hooks the boat up in rough water. Problem it likes to run and harder to run the boat at lower speeds without some porpoise. When I picked my boat up I made sure the throttle linkage was checked for full throttle. Dealer needs to put it on the machine to check

  18. Member
    Join Date
    Jul 2007
    Location
    Onalaska, WI
    Posts
    439
    #18
    The 24’s are known to be off out of the box. I’d get the prop looked at by Croxton. I’m running a 23 at 6150 pushing 75 on a 20PHX.

  19. Member
    Join Date
    Mar 2013
    Location
    Silsbee, Tx
    Posts
    292
    #19
    @5800 got to 72. This wasn't "tourny load" though. Gonna try a 23P.

  20. Member
    Join Date
    Nov 2012
    Location
    Nederland, Tx
    Posts
    13,596
    #20
    Theres been lots of boats that have had to go back to get the hot foot and throttle adjusted so they get 100% wot and go back to idle correctly. May be worth looking in to

Page 1 of 2 12 LastLast