Results 1 to 4 of 4
  1. 10-08-2020, 09:34 PM #1
    Jbrad
    Jbrad is offline
    Member
    Join Date
    Oct 2019
    Location
    Moulton, Alabama
    Posts
    4

    2008 192 super pro procraft

    Trying to get jackplate adjusted. curious what would be a good starting point. Heard different opinions.. cavitation plate plate level with the keel , prop shaft 3 in. Below pad and suggestions. I am only getting 50mph at 5000rpm so I know something is out....21p prop
    Reply With Quote Reply With Quote
  2. bassboat1
    bassboat1 is offline
    Member
    Join Date
    Aug 2017
    Location
    Hillsboro, NH
    Posts
    3,106
    #2 10-09-2020, 06:20 AM
    Pretty good results if you're running a 60HP Force OB.
    Reply With Quote Reply With Quote
  3. gaboy
    gaboy is offline
    Member
    Join Date
    Feb 2016
    Location
    Musella Georgia
    Posts
    209
    #3 10-10-2020, 09:36 PM
    I don't thing a force would turn 5000. I l I am a PC owner myself and 3 in.s p.t.p. is a good starting place. My setup is 2.875- 3 in according to prop.
    Reply With Quote Reply With Quote
  4. wareagle24
    wareagle24 is offline
    Member wareagle24's Avatar
    Join Date
    Aug 2009
    Location
    Florence, Al.
    Posts
    16,714
    #4 10-11-2020, 10:00 AM
    Quote Originally Posted by Jbrad View Post
    Trying to get jackplate adjusted. curious what would be a good starting point. Heard different opinions.. cavitation plate plate level with the keel , prop shaft 3 in. Below pad and suggestions. I am only getting 50mph at 5000rpm so I know something is out....21p prop
    Need more info. What motor and HP? Is your speed by gps or speedometer? Heavy load or light load?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »