Thread: Versa track

Results 1 to 7 of 7
  1. #1
    Member BuzzBait53's Avatar
    Join Date
    Jun 2011
    Location
    Huntsville Tx
    Posts
    929

    Versa track

    Anyone make a livescope pole mount that is designed to work with versa track. Am about to install a Garmin Force tm and don't want the ducer movement when on spotlock.

  2. Obi Wan Kenobi db_db's Avatar
    Join Date
    Jun 2009
    Location
    Salem, AL
    Posts
    1,174
    #2
    I'm about to do this. Just purchased an Echomap UHD 93sv and Livescope (being delivered Monday). I'm waiting for it to arrive and will figure out what dimensions are needed to fab one up in my shop. I'm planning to make a bracket to connect to the versatrack and be able to flip the pole up along the gunnel and secure it while running from spot to spot.

    "Give a man a fish and feed him for a day...teach a man to fish and, he'll lay out of work, miss dinner dates with the wife....and live happily ever after"

    "He, who dies with the most toys, wins"




  3. Member
    Join Date
    Apr 2017
    Location
    Colleyville, TX
    Posts
    575
    #3
    I made one for my SI/DI transducer because I did not want the SI on the trolling motor and was anticipating moving to the LiveScope in the future. It worked great. Stows compactly and used the Versa Track for mounting. It was made from an:
    3/4" diameter Stickit anchor pole cut to length
    a piece of 3/4"ID plastic pipe
    RamMount D mount
    4" section of 3"x3"x1/4" aluminum angle
    1/2" starboard (HDPE) pad to protect the rail
    2 stainless 1/4" carriage bolts and fasteners
    split PVC section with hose clamp to control depth
    PVC adapter on the end to hold the transducer bracket

    Easy to deploy and when traveling I simply pull up on the pole to clear the water and motor down the lake returning it to the water when needed.

    Transd pole1.jpgTransd pole2.jpgIMG_0830.jpgIMG_0839.jpg
    Joe B

    2017 Tracker PT 190 TX
    2017 Mercury 115 Pro XS
    Mercury Spitfire X7 19” prop
    51 mph @ 6240 rpms (RPMs from Vessel View Mobile) : full fuel tank and fishing load by myself
    4.2 second Hole Shot (measured using Vessel View Mobile)
    Engine mounted in 3rd hole
    Minn Kota Ulterra-Link w/built in MDI 80 lb thrust 60” shaft
    Humminbird Helix 12si Gen1 chirp on console
    Humminbird Helix 15si Gen4 cho on bow
    Humminbird Mega360

    Dotline two step transom boarding ladder
    Tracker trailer bow boarding step

  4. Obi Wan Kenobi db_db's Avatar
    Join Date
    Jun 2009
    Location
    Salem, AL
    Posts
    1,174
    #4
    Made the mount and PVC pole...

    20201011_084226.jpg20201011_084607.jpg

    "Give a man a fish and feed him for a day...teach a man to fish and, he'll lay out of work, miss dinner dates with the wife....and live happily ever after"

    "He, who dies with the most toys, wins"




  5. Member
    Join Date
    Mar 2010
    Location
    Dunmor Ky.
    Posts
    171
    #5
    Fishing Specialties makes a mount for their pole especially for the versatrack.

  6. Member BuzzBait53's Avatar
    Join Date
    Jun 2011
    Location
    Huntsville Tx
    Posts
    929
    #6
    Quote Originally Posted by boatman00 View Post
    Fishing Specialties makes a mount for their pole especially for the versatrack.
    Think I need to slow down on the spending. Just dropped 7 grand on a force trolling motor and two garmin 122sv uhd, plus ultra map card.

  7. Member
    Join Date
    Sep 2020
    Location
    Massachusetts
    Posts
    1
    #7
    I realize theres a lot of VersaTrack ideas, but one i haven't seen that works for me, is to just use 1/4-20 screws or bolts with only a lock washer and nut.
    The 1/4-20 stainless nut fits inside the VersaTrack perfectly and won't spin while tightening.
    Drill a hole in any accessory and bolt it down...
    HTH