I just picked up a 2016 175 TXW today. I have a 12” Helix I want to mount to the bow. I’m not sure if I want to put a Ram mount or a metal bracket like Panther Electronic makes. What have y’all used?
I just picked up a 2016 175 TXW today. I have a 12” Helix I want to mount to the bow. I’m not sure if I want to put a Ram mount or a metal bracket like Panther Electronic makes. What have y’all used?
I wouldn't use a ram, I'd go with a Balls Out if considering a Ram
Mike
2019 Ranger 520L w/ 250HO ETEC G2
2011 Tracker 175TXW w/ 75HO ETEC
If it will anchor a Balzout it should work with a Ram. How about the angled bow panel, anyone use that to mount to? Wondering if it’s stout enough.
I put a Carbon 7 up there on a bracket I fabricated. Had I not had a welder, and the scraps lying around, I would have gone with a BalZout.
bowgraph (2).jpg
2011 Tracker PT 175 TF
2011 Merc 60 ELPT 4S
I put a Panther bracket over the recessed tray...
20200908_082804.jpg
"Give a man a fish and feed him for a day...teach a man to fish and, he'll lay out of work, miss dinner dates with the wife....and live happily ever after"
"He, who dies with the most toys, wins"
I use a Ram mount. I like it because it’s a little higher off the deck and can articulate depending on the conditions.
2018 Tracker 190 TX
Torqeedo 10.0
Humminbird Helix 12 G4N MDI+/SI+
Minn Kota Ultrex 80
I've used the angled bow panel with no issues but the biggest I've had screwed into it was a 7" on the bracket they come with. It would work for a 12" but I'd have bolts with nuts and washers on the other side to make sure it doesn't go anywhere instead of just running screws into it and calling it a day.
2023 Xpress H18 with 115 SHO and Powertech NRS4 21p
8" Bob's Action Jack
Garmin Echomap 12, 10, 9, and LVS34 networked with Netgear Switch
Ultrex
Trick Steps and Ramp N Clamp
Pulled by a 2016 single cab HEMI Ram
Treat others like you want to be treated when on the water EVEN WHEN IN A TOURNAMENT! No fish is worth having a confrontation because you cut someone off or came in on top of someone.
Shoot me a call or email
270-703-6133
jordanh@precisionsonar.com
We can get you taken care of.
Here is the two options I would suggest.
lockjaw pms.jpgbmsb.jpg
I ended up with the tall Precision mount and it turned out very well. Easy install and I have plenty of room. I was a bit worried the 12” unit would be a little large for the area but it all turned out great.