Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jun 2016
    Location
    South Carolina
    Posts
    1,975

    C-Monster Module?

    Can someone explain to me what all this is capable of?
    I thought you could already interface c monster with HDS units. What else or how can this module be used?
    I see it is a nema2k component

  2. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,927
    #2
    The module is for connecting the Power Pole Charge to compatible graphs.. thru the nema network

  3. Member
    Join Date
    Jun 2016
    Location
    South Carolina
    Posts
    1,975
    #3
    Is that it?

  4. Member
    Join Date
    Jan 2015
    Location
    Lino Lakes, MN
    Posts
    141
    #4
    yes that's it. I have it and it was worth it for me to see my batteries all the time on my graph. It also gives you the ability to initiate the emergency start through your graph as well.
    NPAA #803

  5. BBC SPONSOR
    Join Date
    Jan 2007
    Location
    Tampa, FL
    Posts
    350
    #5
    Astyle - The current connection with compatible anchors to HDS units is through bluetooth connection. The down side to Bluetooth is limited range, signal strength and number of connections. All of this is much improved over our C-Monster wireless network.

    The C-Monster Gateway is a direct C-Monster connection from C-Monster capable products(future products included, not just JL Marine products) to any device on the NMEA2K backbone that is open to the C-Monster network.

    I hope this makes sense, if not please let me know and I'd be glad to discuss with you further!