I recently bought a fury 3-blade 24p for a 2012 Mercury 200 pro xs. When I hit 60.7 mph it blows out, what would cause it to blow out at this speed?
I recently bought a fury 3-blade 24p for a 2012 Mercury 200 pro xs. When I hit 60.7 mph it blows out, what would cause it to blow out at this speed?
Motor is too high, Or you bought a used prop that was repaired poorly most likely.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Fury likes to run a little deep
Jimmy
Phoenix 721
12" Bobs Hydro Plate
Mercury 300 Xs
Dave Bush Racing Kit
28.5 Bravo
Prop was bought brand new. I dropped my motor down an inch and tried it but it still blows out.
Over trimming??
What boat is the motor attached and what is the prop to pad measurement?
USN Retired
2020 Basscat Caracal
2020 Mercury 225 ProXS 4s
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Would it be better if I drop down to a 23p?
Do you have a transducer or anything mounted on the transom that would disrupt the water flow to the prop.
No I don't.
What boat is this?
Plugs??
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD
Is it blowing out on take off? If so, then definitely you need to add plugs.