Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Sep 2009
    Location
    Lincoln
    Posts
    301

    E-tec 90hp Lower Cowlings and Engine Cover Compatibility

    Are these cowlings compatible throughout the years other than color?

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,277
    #2
    shop2.evinrude.com compare the parts.

  3. Member
    Join Date
    Jan 2006
    Location
    Salem, wi
    Posts
    487
    #3
    Hard to say without extensive part number research. Recommend you also post the question here https://www.etecownersgroup.com/categories.
    and don’t to neglect to provide the engine model number

  4. Member
    Join Date
    Sep 2009
    Location
    Lincoln
    Posts
    301
    #4
    Quote Originally Posted by ChampioNman View Post
    shop2.evinrude.com compare the parts.

    I did do that. All look the same even have the same grommets.
    Last edited by jeff_3272; 10-03-2020 at 04:46 PM.

  5. Member
    Join Date
    Sep 2014
    Location
    okanagan, bc
    Posts
    128
    #5
    the evinrude part numbers on cowl parts can change year to year due to the sticker kit even though the cowl itself is identical.

  6. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,277
    #6
    Quote Originally Posted by suzukidave View Post
    the evinrude part numbers on cowl parts can change year to year due to the sticker kit even though the cowl itself is identical.
    Part number differences will be in the coloring not the decals.

  7. Member
    Join Date
    Sep 2014
    Location
    okanagan, bc
    Posts
    128
    #7
    Quote Originally Posted by ChampioNman View Post
    Part number differences will be in the coloring not the decals.
    maybe a physical change then? my 2005 cowl has some badly repaired damage so i did look what was available on ebay and tried to confirm fitment on evinrude. for the 200 90 degree models at least the cowls come as partially decalled assemblies and the part number for 2005 cowl is unique. too expensive anyway, so i will fill and repaint.

  8. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,277
    #8
    It is always based on the model number. We post the links to look up the parts, it is your job to do the research. The OP asked if they were compatible other than color, I provided an answer as did bighare. Just because they may look the same doesn't mean they will fit. Especially important in the belly pans.