My NOCO 2-bank charger died on my 2016 Tracker 190TX and I can seem to get the cables out. Any help would be appreciated...
My NOCO 2-bank charger died on my 2016 Tracker 190TX and I can seem to get the cables out. Any help would be appreciated...
I replaced mine on my 2017 Pt190 with a 3 bank charger and it was not easy. My NOCO was located under the center seat with wires snaking back into the battery compartment. To make running the wires easier I tied a messenger cord to one of the wires on the charger before removing it. This gave me a cord to pull the new wires back through the same pathway. If I ever need to do it again I will mount the charger in the battery compartment. I know there is not much room back there but I saw several people on this board mount their chargers on top of the gas tank which seems like a splendid idea.
Joe B
2017 Tracker PT 190 TX
2017 Mercury 115 Pro XS
Mercury Spitfire X7 19” prop
51 mph @ 6240 rpms (RPMs from Vessel View Mobile) : full fuel tank and fishing load by myself
4.2 second Hole Shot (measured using Vessel View Mobile)
Engine mounted in 3rd hole
Minn Kota Ulterra-Link w/built in MDI 80 lb thrust 60” shaft
Humminbird Helix 12si Gen1 chirp on console
Humminbird Helix 15si Gen4 cho on bow
Humminbird Mega360
Dotline two step transom boarding ladder
Tracker trailer bow boarding step
literally got in trouble for laughing out loud!!! this made my dayOriginally Posted by joe3buck3
I mounted mine on top the gas tank, no issues at all.
Mounted my Dual Pro 3 in a toolbox and made it completely remote.
Mike
2019 Ranger 520L w/ 250HO ETEC G2
2011 Tracker 175TXW w/ 75HO ETEC
Reply With Quote