Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Apr 2012
    Location
    Oxford, NC
    Posts
    202

    Can’t get Carbon bow unit to recognize Ghost HDI transducer...

    I installed 2 new HDS Carbon 12 units. One on the bow and one on the console both connected by Ethernet and NMEA 2000. The one on the console is connected to a 3 in 1. The one on the bow is connected to a new Ghost trolling motor with the cable adapter provided with the Ghost.
    I cannot get the Down Scan and 2D to work on the bow unit from the Ghost HDI. Any suggestions would be appreciated.....

  2. Member
    Join Date
    May 2016
    Location
    PNW Washington State
    Posts
    675
    #2
    In the transducer list select M/H-9 if I remember correctly.

  3. Member
    Join Date
    Dec 2004
    Location
    Woodland, CA
    Posts
    773
    #3
    Try connecting it to the Structure port. No adapter needed and no need to select a transducer. Make sure Multisource and Channel 2 are both on.

    NoCAL
    2004TR-21X/2015 250 ProXS
    2B112175