Mega 360 sonar and maps issue.

[Jwnwelding]

Ok so let me try to explain this correctly. I have helix10gn3 w/ my mega 360 plugged into it. My 10gen2 has the mdi from the trolling motor plugged into it. Both have Ethernet from black box. If the gn2 is on with 2d showing and I turn on the mega 360 to the gn3 my gn2 jumps from 2d back to maps. But if I go into network source and turn the 360 off for the gn2 it works correctly. But the gn2 keeps trying to read the mega 360 even when it’s not checked off.

[Jwnwelding]

Anybody have any ideas why.

[hlewis12]

I’ve got a g3n MDI 12 at the bow with mega 360 hooked up to it. I’ve got a g1 si 10 and a g2n si 12 at the console. Everything is linked via Ethernet hub. If I do not turn off 360 in network setting on my 12 at the console it constantly jumps back to the map screen. Very annoying. I think it has something to do with the 360 unit coming in and out of the water and loosing connection. It’s so annoying that on the console screen it pops up that it lost connection with the 360 and do you want to turn it off. You can select yes turn off 360 and it doesn’t change the settings in network settings. You have to go into network setting through the menu to turn it off. Very annoying.