On my 112 Ultrex, the power light came on when I pushed the 60 amp breaker toggle back in after charging the batts. I thought maybe I left the power switch on after last trip, but it was off. On the lake that day while deploying the Ultrex, the power light came on again. I duplicated this issue twice on the lake that day. It didn't do it in the afternoon at all. Any thoughts? My nearest ASC is quite a distance from where I live. Thanks for any ideas/ help.
Scott Inman
There are two wires that connect to the power switch on the foot pedal and one of them is loose. Just pop the switch out from the top and lightly crimp the terminal ends with a pair of pliers. It's a very common problem and a simple fix. It only takes a couple of minutes to do.
2018 Ranger RT178
Yamaha 75hp
Atlas Micro Jacker
80lb Minn Kota Ultrex
Thanks! I'll do that.
Scott Inman
It can be also be bad switch. Both are pretty common I think. ASC had to do switch on mine.
Reply With Quote