If you wanted to share the mega 360 image with the bow and counsel units, both units are Helix gen 3 units, do you connect the 360 to the front unit or the network hub?
If you wanted to share the mega 360 image with the bow and counsel units, both units are Helix gen 3 units, do you connect the 360 to the front unit or the network hub?
The MEGA 360 connects to a SI+ or D+ unit's transducer port. It can be shared via Ethernet.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Thanks Wayne. Being new to Hummingbird units is there anything I need to setup in the Helix's to share or receive the 360 image?
The units need the software version that supports the MEGA 360 either directly or shared from a MEGA 360 connected unit.Originally Posted by bassen23
Then the displays need to be networked via Ethernet.
The day the units were made would determine if they have that software or if you have to update them.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
The software date is December 2019. So it has to be that one 2.180, or a current version.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Reply With Quote