Hds Gen 2 touch no depth

[jgrenin]

Was out last weekend and all of a sudden my unit quit showing depth. I had depth from my ls-1 but now got no depth on either. I tried a different unit and same results. It will show depth every now and then but shows the - - - most of the time. I tried editing the overlay (delete/ re-add), made sure it was on local, etc. I can hear both transducers making noise when out of the water. I find it hard to believe that both transducers go out around the same time. Anyone experienced something similar or suggestions on things to try?

[kennybryan]

Try AUTO CONFIGURE and see what happens.

[Team Colibri]

Save waypoints (not settings) and do a hard reset.

Soft Reset HDS units
(does not delete user data)
--turn unit OFF
--press and hold the PAGES button
--press and release the LIGHT/POWER button
--release all buttons when the USA map appears

Hard Reset HDS units
(deletes stored user data such as waypoints and trails) Back up your files to a SD card first!

--turn unit OFF
--press and hold both the ZIN and ZOUT buttons
--press and release the LIGHT/POWER button
--release all buttons when the USA map appears