Can I link a T1 9 to a HDS 7 ? I know the 7 has a 7 pin transducer and the T1 9 has a 9 pin is there a Y connector that will work on both? Thanks for your help
Can I link a T1 9 to a HDS 7 ? I know the 7 has a 7 pin transducer and the T1 9 has a 9 pin is there a Y connector that will work on both? Thanks for your help
What are you trying to accomplish? You could link them by NMEA 2000 to share waypoints but that’s about it as the Ti units have no Ethernet capability.
NoCAL
2004TR-21X/2015 250 ProXS
2B112175
Thanks. What I'm trying to accomplish is reading depth when running down Lake I Have The 3 IN 1 and also the THRU hull but LOSE DEPTH around 30 MPH
You can only link them by NMEA to share waypoints. 3 in 1 is notoriously difficult to get installed correctly but with the right install it should read up to about 45-50. Above that would be rare in my experience.
NoCAL
2004TR-21X/2015 250 ProXS
2B112175
If you have different transducers on them, you can get depth from any one of them shown on the other unit using NMEA2000.
But what you really want to do is have your shoot-through (I`m guessing that is what you have and not a through-hull) work like it should. That typically means re-locating it, and this time test it on water before you fix it permanently.
Reply With Quote