Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2020
    Location
    Tupelo, MS
    Posts
    12

    Removing cable cover on 2017 Tracker 175 TXW

    How is the aluminum cable cover, located behind the driver’s seat alongside the gunnell, attached? I’ve dug and dug thru the carpet with a sharp pointed awl and found where I believe three screws or rivets would be but cannot find the head of anything. Are they screwed down or riveted vertically into the deck or are they angled toward the outside of the boat?

  2. iNCORRECT pOLITICALLY
    Join Date
    Jan 2012
    Location
    Little Rock, AR
    Posts
    10,174
    #2
    They're just standard screws that take a #2 Phillips bit. Remove them and that cover will come right off.
    2023 Xpress H18 with 115 SHO and Powertech NRS4 21p
    8" Bob's Action Jack
    Garmin Echomap 12, 10, 9, and LVS34 networked with Netgear Switch
    Ultrex
    Trick Steps and Ramp N Clamp
    Pulled by a 2016 single cab HEMI Ram

    No one likes a pot licker or GPS pirate. FIND YOUR OWN FISH!

  3. Member
    Join Date
    Aug 2020
    Location
    Tupelo, MS
    Posts
    12
    #3
    Quote Originally Posted by Highcentered View Post
    They're just standard screws that take a #2 Phillips bit. Remove them and that cover will come right off.
    Thanks. I finally found all 4 of them. They were well hidden.