I’ve seen it come up before on here but can’t seem to find it. I have brakes on one axle and they only installed a bleeder screw on the passenger side Caliper. How do I add one to the drivers side?
I’ve seen it come up before on here but can’t seem to find it. I have brakes on one axle and they only installed a bleeder screw on the passenger side Caliper. How do I add one to the drivers side?
They should be attached together with the same hose. Bleed the one and both are done
Collision Consultants of Akron--- Marine Fiberglass repair and electronic installer 3309333230
Call MM and they can send you a kit to add a fitting and bleeder to that other caliper. I had to do it on my four brake tandem. I could not get all caliper to bleed well with just that one bleeder and I wasn't getting a brake application on all wheels. Added the other three bleeders and all good. May be more simple with just two calipers piped together, but if you're not seeing the same wear on both rotors, something's wrong.
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD
I’ll give them a call and get one thanks.