I will be powering a MK220PC and a MK330PC through a NOCO 2-way splitter.
MK shows this for recommended power cords:
Obviously the chart assumes one charger. Since I am running two, what AWG cord do I need if the run is about 15'?
Thanks
I will be powering a MK220PC and a MK330PC through a NOCO 2-way splitter.
MK shows this for recommended power cords:
Obviously the chart assumes one charger. Since I am running two, what AWG cord do I need if the run is about 15'?
Thanks
2006 Triton TR196 w/ 200 Optimax \ 2021 AlumaRyder 1860 w/ 200 Rotax
Thank you. I was thinking the same thing unless I make a 15’ cord.
2006 Triton TR196 w/ 200 Optimax \ 2021 AlumaRyder 1860 w/ 200 Rotax
For a one time purchase can’t go wrong with biggest you can afford or get since they don’t really fail. No downside to bigger when talking extension cord
2005 Ranger 520DVX w/ 225 Yamaha SHO
I hear you. It isn’t a money issue; I was hoping that I could use a power cord that I already have and put a female end on it at the spot I wanted it so that it wasn’t much longer than I need. Turns out that the one I was thinking of is only 16 AWG so that idea won’t work. I have a 50’ 12 AWG but I don’t want to cut it down to size. I guess I will just get a 25’ one.
Last edited by zelmo; 09-22-2020 at 09:06 AM.
2006 Triton TR196 w/ 200 Optimax \ 2021 AlumaRyder 1860 w/ 200 Rotax
As I shop for a cord many of them have lighted ends. Is there any downside to that?
Also, I wasn't thinking about the need for a surge protector. Looking at them online nobody lists the cord size, just the amperage. To be safe should I get one that works as a wall tap instead of corded?
2006 Triton TR196 w/ 200 Optimax \ 2021 AlumaRyder 1860 w/ 200 Rotax