Anybody got a 6" hydraulic JP on a 188??? And what were your results?
Yes I know about the warranty and dont need to hear any of that!!!
Anybody got a 6" hydraulic JP on a 188??? And what were your results?
Yes I know about the warranty and dont need to hear any of that!!!
Install it and give us the results.
I do, 6” atlas on my 17’ 188. Haven’t pushed it to the max yet because I haven’t install a water pressure gauge.
More importantly, what prop are you gonna run? You'll need a cupped LaserII or an X7. I ran a 6" JP on a Lowe 18HP, which has a pad bottom. Gained 2mph and a ton of "Squirrel". I run my X7 19" at hole 3 and it runs like it's on rails. Spend the money on the X7. Remember, there is NO lifting surface on the 188s, so don't expect much.
2015 Ranger RT188 DC; BassCat Storage Box; Mercury Optimax 115ProXS;
19" Spitfire X7; Vessel View Mobile; Minn Kota Ultrex 80; GForce Handle;
TM Eliminator; Helix 7 G2N SI Combo F/R; HydroWave KVD; BBT 4" Angled Bow Mount; Durasafe Locks for Electronics and Ultrex;
Twist Step Boarding Ladder; EZEE Step ES1; BAC RAC Rod Storage; Motor Mate Transom Saver
being that the 188 does not have a "pad" (unless you're talking a 188P).......why bother?....you will not like the results.
Ran a 6" manual on mine and I did like the difference it made in handling and staying on pad at slower speeds. I will say I left it alone where it was set when I picked it up because the pluses outweighed me moving it 1/4" at a time to find the most top end. I was maybe 1 mph on top end but I know I left some on the table.
1995 Viper 201D
1995 Johnson Venom 200
Gas mileage is for sissies