Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Aug 2020
    Location
    Maryland
    Posts
    17

    2 degree trim wedge

    02 tr 22 225 efi feels like it needs more trim. What do you think about wedges

  2. Member
    Join Date
    Jul 2004
    Location
    Penn PA
    Posts
    15,191
    #2
    What brand motor?



  3. Member
    Join Date
    Aug 2020
    Location
    Maryland
    Posts
    17
    #3
    02 mercury , stock 25 fury and I'm turning 5650

  4. Member
    Join Date
    Mar 2005
    Location
    Tucson Az
    Posts
    102
    #4
    Where are you buying them at.

  5. Member
    Join Date
    Jun 2004
    Location
    Glenpool, OK
    Posts
    8,975
    #5
    I ran them on my21hp I've got a set to put on my 21trx just. Haven't done it yet.
    you can try a set of trim extenders real quick ,I wouldn't run the extenders very long but you can test them and remove them in a few minutes

  6. Moderator Fishysam's Avatar
    Join Date
    Oct 2016
    Location
    Jamestown North Dakota
    Posts
    9,329
    #6
    Well mercury says not to add anything like either of these choices. But what's red line on that motor? I can't imagine you can turn a 25 fury on that boat, unless slip numbers are not as low back then (this is what I have heard).
    Mercury 250 proxs 2B115089

  7. Member
    Join Date
    Nov 2008
    Location
    Raleigh NC / Falls Lake
    Posts
    11,210
    #7
    Let's see some pic's of the boat , don't see many of the 22's around here any more?

  8. Member
    Join Date
    Jan 2005
    Location
    Red Oak Va.
    Posts
    10,597
    #8
    Depending on what motor he has rpm's are 5800 on the older motor and 5750 on the down draft model which it should be of it's a 2002. Actually 5650 with a 25 fury is pretty good but I'd run a tempest on that boat to get more bow lift.