-
Ultrex issues
Hey guys, I'm having a hard time seeing my drop shot on my Live, seems like when I see it my line is under the boat, did I forget to install something?
2001 Ranger
2019 Ultrex
2020 Live
-
Is the shaft perpendicular to the water. Could be looking behind or even in front of the boat.
-
Member
Sounds like you need to adjust the angle of the transducer
I can say that the Ultrex is designed with a slight angle built into its shaft to keep pressure on the lower unit when it is stowed (poor design) this results in a slight reverse angle to it when it’s deployed
This is more pronounced on some boats like the tritons that already have a downward slope to the deck at the nose of the boat not sure about older rangers
You might need to angle the transducer up a couple of degrees to get a level look forward
But the more you turn the motor the more the transducer will angle up
You will have to play with it to find a happy medium
Another option is to put a wedge plate under the Ultrex to remove most or all of the angle caused by this design