Thread: prop hub

Results 1 to 7 of 7
  1. 09-13-2020, 09:54 PM #1
    biglakespecks
    biglakespecks is offline
    Member
    Join Date
    May 2020
    Location
    Paulina, Louisiana
    Posts
    81

    prop hub

    Triton 19xs 2014 2b776205 mercury four stroke pro xs prop has a 840389K06 solid hub in my prop. Would or should I consider a 8M0101601 hub incase I hit something?
    Reply With Quote Reply With Quote
  2. 21XDC
    21XDC is offline
    Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,450
    #2 09-14-2020, 04:15 AM
    That is the hub I would run if I had a fat shaft.... But I don't think it will help on impact. Just a softer shift.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
    Reply With Quote Reply With Quote
  3. Real L
    Real L is offline
    Member
    Join Date
    Mar 2017
    Location
    Quebec/Canada
    Posts
    999
    #3 09-14-2020, 06:54 AM
    So what is the big difference between the solid hub (840389K06) and the SSR hub (8M0101601) ?
    Motor:2B591233
    Reply With Quote Reply With Quote
  4. mdtritn21
    mdtritn21 is offline
    Member
    Join Date
    Jan 2005
    Location
    Red Oak Va.
    Posts
    10,597
    #4 09-14-2020, 11:49 AM
    If you have prop rattle or shift banging use the SSR hub which has rubber molded on one end to absorb some of the shock. The regular solid hub has rubber strips glued to the sides of the hub to stop movement. SSR is harder to change than the regular HD hub and costs $20 more.
    Reply With Quote Reply With Quote
  5. biglakespecks
    biglakespecks is offline
    Member
    Join Date
    May 2020
    Location
    Paulina, Louisiana
    Posts
    81
    #5 09-15-2020, 10:51 AM
    Explain hard to change.
    Reply With Quote Reply With Quote
  6. 21XDC
    21XDC is offline
    Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,450
    #6 09-15-2020, 11:21 AM
    It really gets stuck in the prop. Takes a lot to get it out.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
    Reply With Quote Reply With Quote
  7. mdtritn21
    mdtritn21 is offline
    Member
    Join Date
    Jan 2005
    Location
    Red Oak Va.
    Posts
    10,597
    #7 09-15-2020, 04:26 PM
    I see Merc is telling you to put 2+4 lube in the hub now before driving the rubber in with a block of 2x4. They say it makes it easier to remove the hub later
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »