Talon issue

[edge]

I have a 15 foot model. I've paired my remotes but when I try to get them to deploy they don't work- but I can deploy from the Talon itself. But, the remotes work when I ask them to retract the Talon.

All software is up to date. Suggestions?

[BigRick52]

Double tap the down button.

[Real L]

They have to extend to a certain lenght. You cannot do that in your driveway but in the water.

[721Proxs]

That makes no sense of not deploying in your driveway, the Talons do not know how far down the bottom is. I deploy mine at the ramp each time before I launch the boat to ensure the battery in the remote is good. They never fail to deploy while on the trailer.

[ThomasD]

They have to extend to a certain lenght. You cannot do that in your driveway but in the water.

Yes you can. To the op, like BigRick said, try double tapping the down button.

[Real L]

There was another thread started on here called ''Talon Spike Won't Retract ! Help! dated 03-04-2018 started by MNbasser11. Look at intervention # 12

(Correction) I guess I didn't read well. My Talon deployed with the remote but would retract only with the button on the Talon. (opposite). Check the battery.

[edge]

I re-paired it - it worked! Thanks guys!