Any recommendations on how to run wiring for an additional fish finder on the bow on an FXR?
Any recommendations on how to run wiring for an additional fish finder on the bow on an FXR?
There's already a 2nd set of orange and a black 10 gauge ran to the front from the bus in the back compartment. Which is hooked to the battery with 6gauge. Same as the unit that came stock.
Thanks densik!
X2
Is the FXR the only year models that include this or did they do this in previous models?
2019 Skeeter FX-21
250 SHO
Lowrance 16” Live & 12” Live
Ghost TM
My 2019 FX 21 LE has the same setup
Started in 2019, and is on the ZX225 and up
Thank you for the info!
2019 Skeeter FX-21
250 SHO
Lowrance 16” Live & 12” Live
Ghost TM
My 2020 ZX200 has it. It also has the one I ran.
Wish I had looked before I pulled the wire.
Would this be the same on a 19 FX21? I see one set of orange and black wires but can seem to find the second. Also can I hook the 360 up to one of the accessory wires under the bow panel.
Last edited by stwright1; 06-25-2021 at 11:40 PM.
It's in there stwright, you may have to hunt for it.
It will depend on what the rigger did on your boat when it was delivered.
My 19 fx 21 le has both sets.
What units are you running?