I lost one of my chrome caps off my bearing grease fittings this weekend. Does anybody know who makes the bearing buddy type caps that pop out blue when the bearing is full of grease? The cap is chrome and about silver dollar sized. I know it not a Dexter or bearing buddy type
UFP?
Something like this?
https://www.pacifictrailers.com/prod...kaAhZCEALw_wcB
This what you are talking about? https://www.easternmarine.com/traile...tectors-07500u
I got mine from shadow boat in california
I wouldn't just put the cap back on, I would pull that rotor or drum and make sure the bearings are good. Those caps don't usually just fall off.
The bearings may be bad and got everything hot expanding the rotor or drum and allowing the cap to fall off.
good luck
they seem like a good place to deal with,have you used them very muchOriginally Posted by javelin90
This is so true, they just dont fall off.
2008 Ranger 178VX
150 Yamaha V-max
GO Fins!!!
A little high temp red silicone along the lip of the grease cap will help hold them on when you otherwise might lose them.
"The man of system is apt to be very wise in his own conceit; and is often so enamored with the supposed beauty of his own ideal plan of government that he cannot suffer the smallest deviation from any part of it…He seems to imagine that he can arrange the different members of a great society with as much ease as the hand arranges the different pieces upon a chessboard.” Adam Smith, The Theory of Moral Sentiments
Reply With Quote