Can anyone show me how and where you have mounted your transducer.
I've got a lowrance total scan transducer to mount
thanks.
Can anyone show me how and where you have mounted your transducer.
I've got a lowrance total scan transducer to mount
thanks.
this is where i mounted mine on my ProCraft FS
20180331_113219.jpg
I don't have a Skeeter but...
I didn't want to mount into the fiberglass so I originally bent a piece of aluminum and mounted to 2 threaded holes on my jack plate. It worked but I wanted to block the bottom opening of the jack plate so I bought a Hydro Dynamics Skid Plate and mounted it to the bottom of that.
Another option I saw on the forum, that I believe a user makes and sells is a small plate that mounts to a motor/jack plate bolt and then the transducer mount bolts to that, simple and easy. But I can not seem to find the thread I saw it in.
2019 Ranger 212LS with a 2019 Mercury 250 ProXS 4-Stroke
Humminbird HELIX 10 MSI and HELIX 10 Chirp (side by side at the console)
Humminbird HELIX 10 MDI+ and HELIX 10 Chirp (stacked at the bow)
Minn Kota Ultrex 112lb with Humminbird MEGA 360
Dual Minn Kota 12' Talon with R&R Design Extended Emergency Ladder
2019 Ranger 212LS with a 2019 Mercury 250 ProXS 4-Stroke
Humminbird HELIX 10 MSI and HELIX 10 Chirp (side by side at the console)
Humminbird HELIX 10 MDI+ and HELIX 10 Chirp (stacked at the bow)
Minn Kota Ultrex 112lb with Humminbird MEGA 360
Dual Minn Kota 12' Talon with R&R Design Extended Emergency Ladder