Currently run a 24 Fury 4 at WOT 5700rpms @ 66 on optimax 250 pro xs. Holeshot is great and handles great. What could I expect from 23 Fury 4? I'll know for sure in a few days.
Currently run a 24 Fury 4 at WOT 5700rpms @ 66 on optimax 250 pro xs. Holeshot is great and handles great. What could I expect from 23 Fury 4? I'll know for sure in a few days.
I didn’t know they had a 23, post the results when you run it.
200 rpm increase but no speed increase.
5900 RPM and probably 1 or 2 MPH as will be in the rpm range where that motor develops peak HP, at 5700 rpm your giving up 20 to 25 HP. Be sure to try running it higher, lift it 1/4 inch at a time, trim for top speed and compare results, When to high rpm will increase and speed will not or drop a little
Hole shot and acceleration will improve for sure
This is assuming there is nothing wrong with the motor or fuel supply not allowing for peak rpm with your current setup, if there is problem there will be no gains at all
Last edited by lpugh; 08-28-2020 at 05:14 PM.
Thank You Leon Pugh
What boat you running this prop on. I’m turning 5700/5800 at 72 with a 250 pro xs on a ranger 520
2000 520vx Ranger
250 PRO XS
SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade