Anybody know what kind of tubing it is?? Hard plastic or rubber or ?? Or what other application it's used in so I can find some in bulk. Thanks
Anybody know what kind of tubing it is?? Hard plastic or rubber or ?? Or what other application it's used in so I can find some in bulk. Thanks
Why not glue in after baking paint?
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
That's what I have always done. Just thought I would try cutting a step by molding in the weed guards when I pour them.Originally Posted by 21XDC
If your handy, I'd make my own from a wooden dowel pieces. Drill a 5/32 diameter hole into a dowel longer than the weed guard. Then use a larger drill just at the jig end to funnel the strands into the hole easier. Try and bake at a lower temp for longer.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Yes Sir, They don't find me handsome, but they do find me pretty handy..Perfect! Thanks!!
Post your results.... Please. Pics too.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Don't forget to keep your stick on the ice!!!!Yes Sir, They don't find me handsome, but they do find me pretty handy..
Medical oxygen hose, the small stuff used with breathing machines is what I use, you probably know someone that throws that stuff away
I tried those before but my weed guards still got messed up. Even the lower temp longer. Hopefully you have better luck.
Had the same issues and its a paint to tie a skirt with the weed guard on
This is how I do it and it gets a better finished result. Jigs are easier to wire tie without the weedguard in place.
Allen
Reply With Quote
.jpg)