Thread: Viper gas gauge

Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    May 2012
    Location
    Somerset, Ky
    Posts
    1,408

    Viper gas gauge

    Ok so most of time the gas gauge says 100% and I’ve had boat out 4x so thinking should be 75% range. While hitting the power button today I briefly noticed gauge showed 67% - that should be correct but it quickly then went back to 100-%. Is there a trick to get gas gauge to work? Thanks

  2. Member
    Join Date
    Mar 2008
    Location
    Buchanan TN
    Posts
    5,530
    #2
    Have you went into settings. Set gas tank to empty, half, full ? These 3 different settings can be done. Try recalibrating the gas tank to 100 %, full. Report back.
    Last edited by billproxs; 08-23-2020 at 09:45 PM.

  3. Member
    Join Date
    Aug 2011
    Location
    Irmo,SC
    Posts
    577
    #3
    Gonna try that myself mine is WACK !

  4. Member
    Join Date
    May 2012
    Location
    Somerset, Ky
    Posts
    1,408
    #4
    Will do- I texted dealer - his is doing the same so messaged caymas - I’ll try the settings recalibration and fill tank up in am

  5. Member
    Join Date
    May 2012
    Location
    Somerset, Ky
    Posts
    1,408
    #5
    I reset full and filled tank- ran maybe 15 miles yesterday and still 100%- it did take 13 gallons so not optimistic of that fix

  6. Member
    Join Date
    May 2012
    Location
    Somerset, Ky
    Posts
    1,408
    #6
    Anyone figure out viper gas gauge? Recalibration didn’t work, crickets from dealer he’s overran currently with pleasure boat stuff

  7. Member
    Join Date
    Mar 2008
    Location
    Buchanan TN
    Posts
    5,530
    #7
    I had to set mine to empty, half, then full. Shut off key, then back on. It started working. Here's manager's text number at caymas. David at caymas might be able to help. Most dealers don't know anything about the viper. Text is 16152892509

  8. Member
    Join Date
    May 2012
    Location
    Somerset, Ky
    Posts
    1,408
    #8
    Thanks I’ll give it a try