Results 1 to 4 of 4
  1. 08-11-2020, 04:50 PM #1
    ohiobasser
    ohiobasser is offline
    Member
    Join Date
    Feb 2011
    Location
    franklin
    Posts
    81

    95 mercury 200 xri no tach

    New to me boat has no tach OG258593. After checking the voltage regulators the top one has melted yellow bullet connects and when the motor is running they get extremely hot. I Changed the gray wire to the bottom regulator and still know tach. Is it possible that both regulators are bad. I know to change both if one is bad.
    Last edited by ohiobasser; 08-11-2020 at 05:18 PM.
    1999 Triton Tr 19
    Reply With Quote Reply With Quote
  2. bassn5150
    bassn5150 is offline
    Member bassn5150's Avatar
    Join Date
    Oct 2008
    Location
    Hot Springs, Ar
    Posts
    904
    #2 08-11-2020, 10:01 PM
    Go ahead and change both. While you're in there, change out your burnt bullet connectors.
    Reply With Quote Reply With Quote
  3. EuropeanAM
    EuropeanAM is offline
    Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    95,166
    #3 08-13-2020, 10:03 AM
    Moved thread to the correct forum for you.

    Replace BOTH regulators and any discolored, melted or burnt bullet connectors. Use ONLY OEM Mercury/Quicksilver components here.


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
    Reply With Quote Reply With Quote
  4. ohiobasser
    ohiobasser is offline
    Member
    Join Date
    Feb 2011
    Location
    franklin
    Posts
    81
    #4 08-13-2020, 02:26 PM
    The two regulators are on there way from Sherms marine
    1999 Triton Tr 19
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »