-
WOT PRO XS help
Trying to check and see if I'm getting full throttle. I found this in a HOW TO by Don.
""-Next, advance the throttle arm all the way FORWARD. At this point, try to move the roller. It should move approximately 1/16" further. IF NOT: STOP. Adjustment will be necessary (and should be verified with the COMPUTER DIAGNOSTIC SYSTEM).""
I read this on one of Don Weed's post.
In checking this on my motor, I find I have at least 1/8" space.
Will this make much of a difference in WOT rpms? I can only get 5650-5700 rpms.
If it needs adjusting, I'm thinking it is the top adjustment screw on the throttle arm?
Thank you board.
-
Are you checking the adjustment with the throttle cable OFF of the motor?
-
-
-
Then adjust following the instructions.