on a 250 mercury if I am correct use 3/8 from tank to bulb and 1/4 from bulb to motor, trying to keep bulb below deck, how long can the1/4 in line be ,, is there a minimum
on a 250 mercury if I am correct use 3/8 from tank to bulb and 1/4 from bulb to motor, trying to keep bulb below deck, how long can the1/4 in line be ,, is there a minimum
Post on Mercury forum. 3/8" from tank to bulb, 5/16" from primer bulb to pulse pump.
2006 Triton TR-21 XD, Mercury 225 Pro XS, S/N 1B287870
do they make a bulb with 3/8 and 5/16 ends
The last Mercury primer bulb I put on my boat was able to do both.
2006 Triton TR-21 XD, Mercury 225 Pro XS, S/N 1B287870
I just did this OEM bulb and fuel lines. Both sizes fit. The supplied plastic clamps only fit on the 5/16" hose. It leaked a couple of weeks later and I put a hose clamp on.Originally Posted by 250xb river rat
1997 Ranger 692VS
2014 Mercury 175 Pro XS 2B111166
Don't mean to hijack your post but it got me to wondering. Ranger Z 20 tank to bulb is 3/4 o.d. and bulb to lift pump is 5/8 o.d., what would the i.d. Be ?
Comanche20 (Don)
2008 Ranger Z 20, 225 RUDE
Ultrex 45/36/112
2 Birds
2020 F150 LIMITED Eco Boost
Should be using radius head ty-wraps.
2006 Triton TR-21 XD, Mercury 225 Pro XS, S/N 1B287870
Reply With Quote