linkage roller?

[Striperaddict]

Found this also on the throttle linkage on top of motor. Is this causing issues maybe? Couldnt find name or part# in my service manual to order if need be yet. Didnt mean to post pic of water pressure tube again

[Striperaddict]

Oops
Again its an 04 200 rude DI

[ELGIN]

You should replace that roller.

[SEAHORSE]

#0432639 ROLLER, Cam follower

[Striperaddict]

Thanks guys
Your knowledge is greatly appreciated

[ELGIN]

You are most welcome............but we are just guessing most of the time.

[Striperaddict]

You are most welcome............but we are just guessing most of the time.

Haha
Your guesses are way better than mine I bet.
I was gonna wrap it with saran wrap and melt it with a lighter!

[ChampioNman]

Don't forget the O ring that holds it in place.. The wheel landed on #0324678

[Striperaddict]

Don't forget the O ring that holds it in place.. The wheel landed on #0324678

Of course it wouldnt come together right???!!!
Thanks

[Bassmeister]

Nope....gotta pay to play....

[mactlman]

You are most welcome............but we are just guessing most of the time.

elgin at work:

[ELGIN]

That would be CM, hes been the Great Carnac long as I can remember.

And needing to purchase an o-ring to install a roller is like a gear case that holds 33 oz of fluid but the bottles they sell are 32 oz so you got to buy two, its called marketing.

[Bassmeister]

Beat me to it !

[ELGIN]

Michael, i cant remember was he the great carnac when we were on the old site, EZ boards, or did he add that after we moved here?

[Bassmeister]

I don't remember the ez boards....but has been here for a while..... Al may know....

[ChampioNman]

Been Carnac since day one.

[SEAHORSE]

Don't forget the O ring that holds it in place.. The wheel landed on #0324678

Nope....gotta pay to play....

And pay you will as that teeny tiny little o-ring retainer is over $5. Go to a hydraulic shop and get an equivalent size o-ring for about a nickle. A hardware store plumbing o-ring may not hold up in a hot and oily environment.

If the o-ring is not brittle, you can often remove it carefully and reuse.

[Bassmeister]

[ChampioNman]

And pay you will as that teeny tiny little o-ring retainer is over $5. Go to a hydraulic shop and get an equivalent size o-ring for about a nickle. A hardware store plumbing o-ring may not hold up in a hot and oily environment.

Yet I get chastised over a piece of 3/8" clear vinyl roller..