Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Aug 2020
    Location
    Texas
    Posts
    4

    1997 Cobra cup holder/compartment

    Hi. I am sprucing up our 18.5 foot 1997 Cobra. There is a cup holder and compartment on the driver side, just under the throttle. I do not know what it is called but I would like to replace it as the plastic lid is cracked. Any ideas or help where I could find one?
    Thank you

  2. Born on th Llano Estacado Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    20,812
    #2
    Picture? If it's fairly flat (no compound curves), Carlton Beach may can 3-D print you one.

  3. Member
    Join Date
    Aug 2020
    Location
    Texas
    Posts
    4
    #3
    This is what it looks like. Thank you for any help you can give me
    IMG_9880.jpgIMG_9876.jpgIMG_9877.jpg

  4. Member Str8upirish's Avatar
    Join Date
    Feb 2012
    Location
    Lodi
    Posts
    58
    #4
    I have the same one that needs replaced.

  5. Born on th Llano Estacado Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    20,812
    #5
    Quote Originally Posted by barsue00 View Post
    This is what it looks like. Thank you for any help you can give me
    Carlton may or may not be able to reproduce that lid. If so, I figure you'd have to come up with the vinyl to recover it. I looked at Great Lakes Skipper and didn't see anything. Might reach out to him and see.

    http://www.bbcboards.net/member.php?u=64964

  6. Member
    Join Date
    Aug 2020
    Location
    Texas
    Posts
    4
    #6
    Thank you, Tx Champ. I have sent Carlton a message. Believe it or not, it isn't vinyl. It is pure plastic that is textured to look like vinyl.

    Str8upirish, I'll keep you posted

  7. Member Str8upirish's Avatar
    Join Date
    Feb 2012
    Location
    Lodi
    Posts
    58
    #7
    thank you

  8. Member
    Join Date
    Aug 2020
    Location
    Texas
    Posts
    4
    #8
    Quote Originally Posted by Str8upirish View Post
    thank you
    Carlton believes he can do it, but he needs the original sent to him.

    Str8upirish, I will PM you his contact so you can speak with him directly.