i have a 97 mercury 200 efi. when the motor is running water pools up under one of the heads i cant see where the water is coming out off but if i had to guess its coming from the head. ill try to post some pictures
i have a 97 mercury 200 efi. when the motor is running water pools up under one of the heads i cant see where the water is coming out off but if i had to guess its coming from the head. ill try to post some pictures
following.
I have a 1990 200 EFI which pools water. I found the leak, which is coming off the water lines. Check to make sure those are all tight. I would think if you had a cracked head it likely would be going out the exhaust rather than pooling. But of course that's speculation without basis not pictures.
after running the engine again i realized its not coming from the head gasket. After looking at the manual i think its coming from between the powerhead and exhaust plate
very possible or bottom of divider plate
.................................................. ...the scariest thing in life is the unknown ...................................
Pics? normal? mine pools up under block both sides. runs out of i tilt down
Theres not a ton of water that comes out. I just noticed it one day while running the engine in the driveway