Wiring question for touch pads

[BassCPT]

What is the "CAN HI" and "CAN LO" wires between the J18 and J2 plugs?



I'm trying to wire the bow trim switch on my 11 Z521 to work on my G2 and I wanted to make sure before I start splicing.

Thanks!

[Barbless]

An Evinrude requires a separate harness that includes a relay to change the signal to a positive ground at the bow if using the bow keypad. Unless you use a bow trim switch provided from Evinrude then it’s basically plug and play.

[BassCPT]

The Evinrude ignition Module I got for the repower has a two wire harness, the problem is there is no place on the distribution box for it to plug into. I’ve confirmed the two wires are indeed for the trim, and I’m guessing I have to splice it into wires that comes off the bow touch pad trim switch. I just don’t know which ones...