I have a 2005 300 HPDI that had a problem on # 2 cylinder at about 190 hours and was replaced under warranty with whatever updates they do. It ran fine until about another 190 hours when the #2 cylinder went down again. Going to rebuild and try it again . Is there anything I can do to make this a more reliable motor while I’m in it ? Thanks for any advice.
F3677613-1306-470E-B573-AE629FDA6C18.jpeg62949B59-3244-40E7-8791-9D47B7987278.jpeg2126ABE1-365B-4627-86FF-FA67F6942FF9.jpeg